im体育官网登录 - IM体育官方网站

im体育官网登录 - IM体育官方网站


标准 rupture discs are available from stock in burst pressures as listed in the chart below. All pressures through 20,000 psi are shaded. These discs are 316 stainless steel (except for 1,000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a range of plus 6% and minus 3% of specified burst pressure. Samples of each batch are then tested and typically the actual average burst pressure is stamped on an accompanying metal tag. There is a +/- 5% burst tolerance applied after the burst pressure has been established. Factors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure.

特殊的光盘 are available on special order for pressure ranges not shown below and in numerous materials and coatings. Consult factory for price and delivery.

标准 Burst Pressures (in psi at 72°)

ID: 36: 标准 Burst Pressures (in psi at 72°):19:1:2


位置45.204.96.42: Hong Kong: HK: LooKup no SessionArray ( [userLocation] => HK [userRegion] => Asia )